2020
Fukui, K., K. Momen, G. Ichiba, T. Fukasawa, T. Ishigami : "Utilization of woody biomass combustion fly ash as a filler in the glue used for plywood production" Advanced Powder Technology, in press.
Karisma, A.D., Y. Shinokawa, T. Fukasawa, T. Ishigami, K. Fukui : "Synthesis of NiCuZn Ferrite Nanoparticles from Metallic Nitrate Solutions Using the Microwave Direct Denitration Method and Evaluation of its Properties" Particulate Science and Technology, in press.
石神 徹，三野 泰志: "コアレッサーにおけるエマルションの繊維フィルター透過シミュレーション" 混相流, 34, 310-317 (2020).
Rozy, M.I.F., M. Ueda, T. Fukasawa, T. Ishigami, K. Fukui : "Direct numerical simulation and experimental validation of flow resistivity of nonwoven fabric filter" AIChE Journal, 66, e16832 (2020).
Ueda, M., M.I.F. Rozy, T. Fukasawa, T. Ishigami, K. Fukui : "Phase-Field Simulation of the Coalescence of Droplets Permeating through a Fibrous Filter Obtained from X-Ray Computed Tomography Images: Effect of the Filter Microstructure" Langmuir, 36, 4711-4720 (2020).
Kusaka, Y., A. Takei, M. Koutake, T. Fukasawa, T. Ishigami, N. Fukuda: "Micro-transfer patterning of dense nanoparticle layers: roles of rheology, adhesion and fracture in transfer dynamics" Soft Matter, 16, 3276-3284 (2020).
Shinto, H., T. Fukasawa, K. Yoshisue, H. Seto, T. Kawano, Y. Hirohashi : "Effect of exposure temperature on the cell membrane disruption induced by amorphous silica nanoparticles in erythrocytes, lymphocytes, and malignant melanocytes" Advanced Powder Technology, 31, 835-842 (2020).
Fukasawa, T., K. Ono, T. Ishigami, K. Fukui : "Electrophoretic classification based on differences in electrophoretic mobility caused by change in the applied electric field" Powder Technology, 362, 586-590 (2020).
Fukasawa, T., R. Nakamura, T. Ishigami, K. Fukui : "Microwave direct denitration for synthesis of Cu-Ce-Zr-O composite oxide and its characterization" Powder Technology, 362, 26-31 (2020).
2019
Rozy, M.I.F., K. Ito, K. Une, T. Fukasawa, T. Ishigami, M. Wada, K. Fukui : "A continuous-flow exposure method to determine degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature" Advanced Powder Technology, 30, 2881-2889 (2019).
Kusaka, Y., A. Takei, T. Fukasawa, T. Ishigami, N. Fukuda : "Mechanisms of Adhesive Micropatterning of Functional Colloid Thin Layers" ACS Applied Materials & Interfaces, 11, 40602-40612 (2019).
Ishigami, T., C. Tokishige, T. Fukasawa, K. Fukui, S. Kihara : "Semiphenomenological model to predict hardening of solid–liquid–liquid systems by liquid bridges" Granular Matter, 21, 103 (2019)
2018
Fukasawa, T., A. Horigome, A. D. Karisma, N. Maeda, A. N. Huang, K. Fukui : "Utilization of incineration fly ash from biomass power plants for zeolite synthesis from coal fly ash by microwave hydrothermal treatment" Advanced Powder Technology, 29(3), 450-456 (2018)
Maeda, N., T. Fukasawa, T. Katakura, M. Ito, T. Ishigami, A. N. Huang, K. Fukui : "Existence Form of Potassium Components in Woody Biomass Combustion Ashes and Its Enrichment on the Factory Scale by Particle Size Classification" Energy & Fuels, 32, 517-524 (2018)
Huang, A. N., K. Ito, T. Fukasawa, K. Fukui, H. P. Kuo : "Effects of Particle Mass Loading on the Hydrodynamics and Separation efficiency of a Cyclone Separator" Journal of the Taiwan Institute of Chemical Engineers, 90, 61-67 (2018)
Higashitani, K., K. Nakamura, T. Fukasawa, K. Tsuchiya, Y. Mori : "Ionic Specificity in Rapid Coagulation of Silica Nanoparticles" Langmuir, 34, 2505-2510 (2018)
Fukasawa, T., A. Horigome, A. D. Karisma, T. Ishigami, K. Fukui : "Synthesis of potassium-type zeolites by the reverse micelle method with microwave heating" Colloids and Surfaces A: Physicochemical and Engineering Aspects, 555, 532-538 (2018)
Fukasawa, T., H. Toda, S. Y. Huang, R. Hiraiwa, A. N. Huang, H. P. Kuo, K. Fukui, "Component separation by vibrating fluidization based on differences in agglomeration properties" Journal of Chemical Engineering, Japan, 51, 576-583 (2018)
Huang, A. N., K. Ito, T. Fukasawa, H. Yoshida, H. P. Kuo, K. Fukui : "Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation" Separation and Purification Technology, 190, 25-32 (2018)
2017
Fukasawa, T., A.D. Karisma, D. Shibata, A.-N. Huang, K. Fukui : "Synthesis of zeolite from coal fly ash by microwave hydrothermal treatment with pulverization process" Advanced Powder Technology, 28(3), 798-804 (2017)
Huang, A.-N., N. Maeda, D. Shibata, T. Fukasawa, H. Yoshida, H.-P. Kuo, K. Fukui : "Influence of a laminarizer at the inlet on the classification performance of a cyclone separator" Separation and Purification Technology, 174, 408-416 (2017)
Maeda, N., T. Katakura, T. Fukasawa, A.-N. Huang, T. Kawano, K. Fukui : "Morphology of woody biomass combustion ash and enrichment of potassium components by particle size classification" Fuel Processing Technology, 156, 1-8 (2017)
Karisma, A.D., T. Hamaba, T. Fukasawa, A.-N. Huang, T. Segawa, K. Fukui : "Validation of measured microwave absorption and temperature change for development of a single-mode-type microwave heating thermogravimetry apparatus" Review of Scientific Instruments, 88, 024101 (2017)
Shirasawa, N., M. Matsuzawa, T. Fukazawa, K. Fukui, H. Yoshida : "Fine particle classification by a vertical type electrical water-sieve with various particle dispersion methods" Separation and Purification Technology, 175, 107-114 (2017)
Higashitani, K., K. Nakamura, T. Shimamura, T. Fukasawa, K. Tsuchiya, Y. Mori : "Orders of Magnitude Reduction of Rapid Coagulation Rate with Decreasing Size of Silica Nanoparticles" Langmuir, 33(20), 5046-5051 (2017)
Huang, A. N., N. Maeda, S. Sunada, T. Fukasawa, H. Yoshida, H. P. Kuo, K. Fukui : "Effect of cold air stream injection on cyclone performance at high temperature" Separation and Purification Technology, 183, 293-303 (2017)
深澤智典, 野村啓介, 川幅康平, 大西洋, 畝一希, 福井国博, 吉田英人 : "逆電気泳動法と直交電気泳動法によるサブミクロンシリカ粒子の湿式分級" 粉体工学会誌, 54(1), 17-22 (2017)
石神徹, 三野泰志 : "精密ろ過におけるコロイド粒子分散系の膜細孔透過シミュレーション" 粉体工学会誌, 54, 362-369 (2017)
忍足 輝男, 山本 一己, 木村 将貴, 深澤 智典, 福井 国博, 吉田 英人 : "粗大粒子分級型サイクロンにおいて粒子濃度が分級性能へ及ぼす影響" 粉体工学会誌, 54, 390-397 (2017)
2016
Segawa, T., T. Fukasawa, A.-N. Huang, Y. Yamada, M. Suzuki, K. Fukui : "Influence of the heating method on the particle characteristics of copper oxide powders synthesized from copper nitrate aqueous solutions" Chemical Engineering Science, 153, 108-116 (2016)
Fukasawa, T., S. Sunada, D. Shibata, H. Yoshida, K. Fukui : "Effects of Sintered-Metal Cone Length on Gas-Cyclone Classification Performance" Chemical Engineering & Technology, 39(3), 484-490 (2016)
2015
Segawa, T., K. Kawaguchi, K. Ishii, M. Suzuki, N. Arimitsu, H. Yoshida, K. Fukui : Nickel oxide powder synthesis from aqueous solution of nickel nitrate hexahydrate by a microwave denitration method, Advanced Powder Technology, 26, 983-990 (2015)
東野元春，前田剛志，福井国博，吉田英人 : 数値シミュレーションによるルーバ型分級機の高性能化に関する検討，粉体工学会誌, 52(5), 252-259 (2015)
Nakatuka, Y., H. Yoshida, K. Fukui : The effect of particle size distribution on effective zeta-potential by use of the sedimentation method, Advanced Powder Technology, 26, 650-656 (2015)
Wakizono, Y., T. Maeda, K. Fukui, H. Yoshida : Effect of ring shape attached on upper outlet pipe on fine particle classification of gas-cyclone, Separation and Purification Technology, 141, 84-93 (2015)
2014
Yoshida, H., T. Yamamoto, Y. Mori, H. Masuda, K. Okazaki, H. Sugasawa : Particle size measurement of reference particle candidates and uncertainty region of count and mass based cumulative distribution, Advanced Powder Technology, 25, 1748-1753 (2014)
Igushi, T., H. Yoshida : Influence of the Number of Detectors for Laser Diffraction Scattering Method: Bimodal Distributions, Particulate Science and Technology, 32, 298-305 (2014)
Yoshida, H., H. Sugasawa, K. Fukui, T. Yamamoto, H. Masuda : Theoretical calculation of uncertainty region for spherical particles based on a picket fence, quasi-monodisperse particles, Advanced Powder Technology, 25, 524-529 (2014)
竹田尚広，忍足輝男，山本徹也，福井国博，吉田英人 : 乾式サイクロンの入口清浄空気および案内羽根が粒子分級性能に与える影響, 粉体工学会誌, 51(9), 614-622 (2014)
松澤光晴，高井健次，坂本祐太郎，村上公威，福井国博，山本徹也，吉田英人 : 電場印加型の垂直流型水篩による微粒子の高精度分級, 粉体工学会誌, 51(2), 68-76 (2014)
吉田英人 : 新型の上下流型水篩装置による微粒子の高精度分級, 化学装置, 56(2), 21-25 (2014)
2013
Hiraiwa, Y., T. Oshitari, K. Fukui, T. Yamamoto, H. Yoshida : Effect of free air inflow method on fine particle classification of gas-cyclone, Separation and Purification Technology, 118, 670-679 (2013)
Fukui, K., M. Katoh, Y. Saeki, T. Yamamoto, H. Yoshida : Effect of packing fraction on indium tin oxide powder synthesis via a solid-phase reaction with microwave heating, Chemical Engineering Science, 98, 17-24 (2013)
Yoshida, H., T. Tatekawa, K. Fukui, T. Yamamoto : A new method of zeta-potential measurement by use of the sedimentation balance method, Powder Technology, 237, 303-308 (2013)
Hwang, K. J., Y. W. Hwang, H. Yoshida :
Yoshida, H. :
2012
Yoshida, H., Y. Hayase, K. Fukui, and T. Yamamoto : Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone, Powder Technology, 219, 29-36 (2012)
Yoshida, H., T. Yamamoto, K. Fukui, and H. Masuda : Theoretical
calculation of uncertainty region based on the general size distribution
in the preparation of standard reference particles for particle size
measurement, Advanced Powder Technology, 23, 185-190 (2012)
Hwang, K. J., Y. W. Hwang, H. Yoshida, and K. Shigemori :
Improvement of particle separation efficiency by installing conical
top-plate in hydro-cyclone, Powder Technology, 232, 41-48 (2012)
Igushi, T., and H. Yoshida : The effect of initial parameters on
particle size distribution inverted using the laser diffraction
technique and a non-linear iterative method, Advanced Powder
Technology, 23, 682-692 (2012)
Igushi, T., and H. Yoshida : Influence of the number of detectors by laser scattering method for estimation of particle size, Review of Scientific Instruments, 5, 055103 (2012)
2011
Yoshida H., T. Igushi, T. Yamamoto and H. Masuda : Theoretical
calculation of fundamental uncertainty region based on the maximum
and/or the minimum size in the preparation of standard reference
particles for particle size measurement, Advanced Powder Technology,
22, 43-49 (2011)
Romanus, K., S. Izumi, H. Yoshida, K. Fukui, and T. Yamamoto :
Separation of Unburned Carbon in Fly Ash Particles Using Special Louver
Separator, Journal of Chemical Engineering of Japan, 44, 146-154 (2011)
Yamamoto, T., T. Shinya, K. Fukui, and H. Yoshida : Classification of
Particles by Centrifugal Separator and Analysis of the Fluid Behavior,
Advanced Powder Technology, 22, 294-299 (2011)
Yamamoto, T., T. Tatekawa, K. Fukui and H. Yoshida : Enhancement of the
Classification Performance of Electrical Field-Flow Fractionation Using
Horizontal Electrophoresis, Journal of Chemical Engineering of Japan,
44, 398-404 (2011)
Yamamoto, T., Y. Harada, T. Tsuyama, K. Fukui and H. Yoshida :
Classification of Particles Dispersed by Bead Milling with
Electrophoresis, KONA, 29, 125-133 (2011)
Fukui K., H. Yoshida, K. Jikihara and T. Yamamoto : Effects of
clean-air injection on particle-separation performance of novel cyclone
with sintered metal cone, Separation and Purification Technology, 80,
356-363 (2011)
重森一葉，山本徹也，福井国博，吉田英人 : 局所的な静電場印加および流動制御を利用した液体サイクロンの高性能化, 粉体工学会誌,
48(8), 526-533 (2011)
竹田尚広，西村洋佑，小澤和三，山本徹也，福井国博，吉田英人 : 改良型の乾式サイクロンによる粒子分離性能の向上, 粉体工学会誌,
48(12), 840-846 (2011)
2010
Yamamoto, T., Y. Harada, K. Fukui, and H. Yoshida : AFM investigation
of the surface properties of silica particles dispersed by bead
milling, Colloids and Surfaces A: Physicochemical and Engineering
Aspects, 362, 97-101 (2010)
Romanus, K., H. Yoshida, K. Fukui, and T. Yamamoto : Influence of inlet
flow rate, pH, and beads mill operating condition on separation
performance of sub-micron particles by electrical hydrocyclone,
Advanced Powder Technology, 21, 246-255 (2010)
Yoshida, H., Y. Nishimura, K. Fukui, and T. Yamamoto : Effect of apex
cone shape on fine particle classification of gas-cyclone, Powder
Technology, 204, 54-62 (2010)
1) 吉田英人 :
"乾式サイクロンの捕集箱に設置した円錐体の効果,"
粉体技術, 3(9), 17-23
(2011)
2) 山本徹也 : "遠心場・電場を利用したナノ粒子分級装置の開発,"
粉体技術, 3(9), 24-30
(2011)
3) 福井国博，吉田英人，山本徹也
: "制御流同伴型サイクロンの分離性能," 工業加熱, 48(5), 37-41 (2011)
4) 山本徹也 : "粒子表面物性を利用した微粒子分級システムの開発," 粉体工学会誌, 49(11), 832-836 (2012)
5) 石神徹 : "膜分離プロセスにおける最新の粉体・流体シミュレーション技術," 粉体技術, 10(5), 26-32 (2018)
6) 福井国博 : "サイクロンの分級・集じん理論と性能の向上," 化学装置, 60(8), 53-55 (2018)
1)「粉体工学ハンドブック」, Marcel Dekker Inc. (1998)
2)「改訂化学工学プログラミング演習」, 培風館(2000)
3)「粉砕・分級と表面改質」, NGT(2001)
4)「微粒子工学大系」, フジテクノシステム（株）(2001)
5)「エアロゾル用語集」, 京都大学学術出版会(2004)
6)「化学装置」, 化学工業社(2014)
7)「粉体操作ガイダンス」，工業通信㈱ (2018)
8)「化学プロセスのスケールアップ、連続化」, 技術情報協会 (2019)